Rife Tube Driver


Q1 2N6059 Transistor, Ignition Coil for a 86-95 Buick with standard Delco ignition for 2.5L or 3.1L engine. Use of this coil provides for separation of primary and secondary windings. (Here is a Alternate drawing using a standard coil) B1 12 Volt car battery or Gel Cell battery. R1 470 Ohm 1/4Watt 5% Resistor.

Q1 should be mounted on a heat sink. Change the duty cycle on the function generator from no more that 50% down to 5 or 10% notice what happens. Use the lowest duty cycle needed. Use spark plug wires and connectors to connect the coil to the rife tube.

HOME

© Copyright 1999 by Control Industries Corporation All Rights Reserved